How to write a Scientific article

 

By

Akrum M.M. Hamdy

[email protected]

CONTENTS:

INTRODUCTION

Scientific research papers are written so that scientists can share their results and ideas with other professionals. Scientific papers give other researchers several specific kinds of information:

1- What were our questions?

2- How did we do our research?

3- What data did we collect?

4- What do the data mean?

5- What conclusions can we draw from our research?

To be sure that all of this information is in every paper, many scientists use a standard outline for their writing. This outline is sometimes called the "IMRAD" format and has five parts:

A-Introduction (I)

B-Materials and Methods (M)

C-Results (R)

D-Analysis (A)

E-Discussion or Conclusion (D)

F- References (R)

 

 

Details:

STYLE

The Structure, Format, Content, and Style of a Journal-Style Scientific Paper


In all sections of the paper, present tense should be used to report background that is already established.

 For example, "The cell membrane is the barrier which separates the inside of the cell from the outside." Use future tense for work that you will do.

For example, "We will test the hypothesis that some anti-microbial agents can permeate the cell membrane during division to inhibit growth." Always use past tense to describe results of a specific experiment, especially your own.

For example, "Application of the antibiotic Chloramphenicol restricted growth of E. coli.".

**Number the pages of the body of the paper beginning with the Introduction as page 1. For a short paper a "Table of Contents" is generally not necessary.

CAPTIONING

Captioning is a method of separating the body of a paper into sections. Headings show organization and identify the topic for a section or a block of information. Capital letters, underlining, point size, and position on the page help to differentiate rank or level.

TITLE PAGE

The person reading, grading or judging a scientific paper can be most objective if the author remains anonymous while the paper is read.

Your name, date, and title of the paper should be on a cover page, and not on any other part of the paper.

See the "Rules for the Paper Competition" for additional information needed on the title page if you are entering the NMJAS Paper Competition.

Your title should be specific in describing the experiment you performed.

For example, "Effects of a Variety of Anti-microbial Agents on Four Bacterial Cultures" is much more interesting than just "Anti-microbial Agents".


ABSTRACT

The Abstract is a summary of the study, with the primary emphasis on results and conclusions.

Very briefly present the question(s) asked the experimental design, a summary of observations, and list conclusions.

Be very succinct - the abstract should be a single paragraph, no more than one page. It should stand on its own; therefore, do not refer to any other part of the report, such as a figure or table.

Avoid long sections of introductory or explanatory material. As a summary of work done, it is written in past tense. Start your introduction on new page.


INTRODUCTION

Keep the introduction brief, but do indicate the purpose of the experiments performed as well as present appropriate background.

Make sure that the reader knows enough to appreciate the relevance of the work and why it is appropriate to ask the question that you will address with your study. Always state the hypothesis and/or objectives in your introduction.


METHODS

You must document all methods performed in your study. Do not, under any circumstances, report methods word-for-word from any of the written sources you used. You need to summarize, in your own words, what you did.

 Also, do not give unneeded detail.

For example, instead of "I took up 1 ml of bacterial broth from a 5 ml tube with a 2 ml plastic pipette and expelled it onto the surface of one agar plate"; write "One agar plate was inoculated with 1 ml of bacterial broth".

 We can also see that in this latter sentence passive voice was used to report methods, a standard for most scientific publications. To give another example, one would write "Cells were grown at 37oC." instead of "We grew the cells at 37oC."

While it is tempting to report methods in chronological order in a narrative form, it is usually more effective to present them under headings devoted to specific procedures or groups of procedures. Some examples of separate headings are "Sources of Materials," "Inoculation Procedures", "Analytical Procedures", "Measuring Zones of Inhibition," and "Statistical Methods."

Don't report information that would be irrelevant to an independent investigator.

For example, not everyone uses the computer software you have in the lab. The programs you used to organize or plot data are not important.

Most important, do not report any results of the experiment in the methods section. These, of course, go in the "Results" section.

RESULTS

Raw data include all observations or data that you get from your experiment. Raw data are never included in your scientific paper unless they are needed to give evidence for specific conclusions which cannot be obtained by looking at an analysis, or summation, of the data. Analyze your data, and then present them in the form of figures (graphs), tables, and/or descriptions of observations.

Data in this form are called converted data. Figures are preferable to tables, and tables are preferable to straight text.

By presenting converted data, you make your point succinctly and clearly.

To give your results continuity, describe the relationship of each section of converted data to the overall study.

For example, rather than just putting a table in the paper and going on to the discussion section, write, "Table 2 shows the means and standard deviations for each interaction of anti-microbial agent and microbe. The results of those interactions with both 0 inhibitions and large positive inhibitions were questionable and were subsequently marked with a question mark (?)." The same goes for figures.

The table or figure should then be presented, complete with title. The title should explain what the table or figure is showing. For example, "Table 2. Means (M) and Standard Deviations (SD) or (SE) of Inhibition Zone Diameters (mm)"

All converted data go into the body of the report, after the methods and before the discussion.

Do not stick graphs or other data onto the back of the report just because you printed or prepared them separately.

 Place raw data at the back of the report as an appendix, if needed.

The appendix is also appropriate for any sample calculations that are needed, such as hand-worked statistical analyses or raw calculations that show how you arrived at reported values. A published research report will seldom have such an appendix, but it may be appropriate in the case of a paper competition.

Do not draw conclusions in the results section. Reserve data interpretation for the discussion.

DISCUSSION

Interpret your data in the discussion.

Decide if each hypothesis is supported, rejected, or if you cannot make a decision with confidence. Do not simply dismiss a study or part of a study as "inconclusive". Make what conclusions you can, and then suggest how the experiment must be modified in order to properly test the hypothesis(es).

Explain all of your observations as much as possible, focusing on mechanisms.

For example, it was resistant to Bacitracin and Vancomycin, both involved in inhibiting peptidoglycan synthesis. The types of penicillins involved in inhibiting transpeptidization in the cell wall, Ampicillin and Methicillin, were more effective in inhibiting growth. The differences in these results may involve the different specific stages at which the antibiotics have their effect on protein synthesis."

When you refer to information, distinguish data generated by your own studies from published information or from information obtained from other students. Refer to work done by specific individuals (including yourself) in past tense. Refer to generally accepted facts and principles in present tense.

For example, "John Doe (1964) found that Chloramphenicol prevents the formation of peptide bonds during protein synthesis while Erythromycin inhibits translocation."

Determine if you asked the right question in the first place. Decide if the experimental design adequately addressed the hypothesis, and whether or not it was properly controlled.

For example: "There were a few problems with the data. A few of the interactions between antibiotic and microbe showed a great amount of inhibition along with absolutely no inhibition. Many of the antibiotic disks were out of date (some as long as 15 years) which may have caused some of the disks to lose their potency. A loss of potency would cause a decrease in inhibition. Although it could be assumed from this fact that the positive inhibition data is the more accurate, it cannot be said with certainty."

Finally, where do you go next?

The best studies open up new avenues of research. What questions remain?

Did the study lead you to any new questions?

Try to think up a new hypothesis and briefly suggest new experiments to further address the main question.

Be creative, and don't be afraid to speculate.
 

For example: "Future experiments might include using cultures of microbes from different sources, such as hospitals, day care centers, and schools to look for signs of lowered resistance."


LITERATURE CITED

Literature citations in the body of your paper should be in parentheses and contain only the author's last name and the date; for multiple authors include the last name of the first author, et al., and the date. If the author's name is used in the text then just the date in parentheses is sufficient. For example: (Monod, 1949) (Neidhardt et al., 1990) or Monod (1949) compared the reaction…..

List all literature cited in your report in alphabetical order by the last name of the first author in a separate section. Use the proper form for citations. If the citation is to a specific page add the page number.

For scientific papers:
        Monod, J. 1949. The growth of bacterial cultures. Annu. Rev. Microbiol. 3:371-394.

For a book:
        Neidhardt, F.C, Ingraham, J.L. and. Schaechter, M. 1990. Physiology of the Bacterial Cell. Sinauer Associates, Sunderland, MA.

For a newspaper article:
        McKay, D. 2000. Arsenic: how much is safe? Albuquerque Journal. July 30, 2000, p. A1.

For a web site:
        National Research Council. 1999. Arsenic in drinking water. Subcommittee on Arsenic in Drinking Water. http://www4.nationalacademies.org/news.nsf/isbn/030906337?OpenDocument.

For a personal communication:
        Sanchez, R. 1993. City of Socorro, Water Utilities Division, Socorro, NM. Personal communication.

 

 

 

Acknowledgement

 

Written with funds from a grant from Intel Foundation


Good Luck

المصدر: Akrum Hamdy
AkrumHamdy

Akrum Hamdy [email protected] 01006376836

  • Currently 220/5 Stars.
  • 1 2 3 4 5
62 تصويتات / 757 مشاهدة
نشرت فى 19 أكتوبر 2009 بواسطة AkrumHamdy

أ.د/ أكـــرم زيـن العــابديــن محـــمود محمـــد حمــدى - جامعــة المنــيا

AkrumHamdy
[email protected] [01006376836] Minia University, Egypt »

ابحث

تسجيل الدخول

عدد زيارات الموقع

1,540,187