Broadband Dielectric Spectrometer (BDS)

Prise list

Novocontrol concept 40 broadband dielectric spectrometer. High accuracy Alpha impedance analyzer from 1 µHz to 20 MHz BDS system is recommended for investigating dielectric and electrical properties for wide range of materials ranging from isulators to semiconductors. Measeured parameteres: All the dielectric and electrical parameters : ac- Conductivity, Dielectric Loss,  Pemitivitty, Electric Modulus, Impedence ...etc.

Available temperature range: from-50 to +150 C

Available Frequency range: from 0.1 Hz to 20 MHz

Single run price is (70 L.E.) for different temperatures

                              (100 L.E) Room Temperature

NRC-Members:

Single run price is (50 L.E.) for different temperatures

                              (50 .L.E) Room Temperature

* Samples must  be provided as disk or sheet both with  smooth surfaces.

*Dielectric spectroscopy is a non-invasive test, i.e. samples should not be exposed to any temerature condition that causes or induces any structural or chemical changes within the measured samples that could damage the measuring electrodes.

*Samples should not interact with copper electrodes used for sample measurement, otherwise it should be stated clearly to the staff to solve the problem.

*Any disregarding to the previous notes would cause a threat to the electrodes and measuring system. In such a case the client will pay the cost of the damaged part(s) cost separately.