عدد 7 مقال فى الأرشيف
- الأحدث
- الأكثر مشاهدة
- الأكثر تصويتا
الترتيب حسب
-
A faulty casting has arrived at your facility’s door. You’re not exactly sure what’s wrong with it, but from what you’ve heard, you’re pretty sure it’s “porosity.” You call your
-
diffrent types of castings defects
A properly designed casting, a properly prepared mould and correctly malted metal should result in a defect free casting. However, if proper control is not exercised in the foundry-sometimes it
-
16 ديسمبر 2015 / 227 مشاهدة
The operating speed of the mill can be expressed in percent of the mill critical speed. The optimal operating speed depends mainly on filling degree, grinding media size and type
-
Making a casting involves steps
-
25 يونيو 2011 / 391 مشاهدة
Grain boundaries serve as barriers to dislocations, raising the stress required to cause plastic deformation. The second phase boundaries resist the dislocations motions, increasing the material strength. The
-
9 يونيو 2009 / 282 مشاهدة
-
Heat Resistant Castings-Iron Base Alloys
7 يونيو 2009 / 347 مشاهدةTel: +91-11-513 3021, 514 3474 | Fax: +91-11-540 5799, 514 6900 e-mail: contact@acmealloys.com | Web: www.acmealloys.com Heat Resistant Castings-Iron Base Alloys Castings are classified as heat resistant if they are
